Categories

BT Telephone ADSL Broadband Faceplate Filter Adaptor (Centralised Filter/Splitter) – fits front panel of BT NTE5a / NTE5 b Master Socket – IMPROVES BROADBAND SPEED & RELIABILITY* – made in UK (As fitted by BT) – Sale Item

BT Telephone ADSL Broadband Faceplate Filter Adaptor (Centralised Filter/Splitter) - fits front panel of BT NTE5a / NTE5 b Master Socket - IMPROVES BROADBAND SPEED & RELIABILITY* - made in UK (As fitted by BT)

  • A faceplate filter/splitter of the type installed by the BT engineer for an installed ADSL service. Some have a BT logo, others are plain (both are the same product)
  • IMPROVES BROADBAND SPEED AND RELIABILITY* (*although not guaranteed to be any different, we have generally found a noticable increase & less drop of broadband in poor signal areas)
  • It replaces the lower half of the BT NTE5a or NTE5b master socket and provides two outlets on the faceplate, one is an RJ11 socket (wired “straight through”, unfiltered) for the connection of ADSL modems, the other is a BT 431A socket which is filtered for the connection of telephony equipment.
  • Saves putting a filter on every socket, only 1 is needed – you need to cable from this socket to the computer separately
  • Compatible with caller display (doesn’t strip out the caller ID information) – Tested by BT to SIN issue 2.2

A faceplate filter/splitter of the type installed by the BT engineer for an installed ADSL service.

IMPROVES BROADBAND SPEED AND RELIABILITY* (*although not guaranteed to be any different)

It replaces the lower half of the BT NTE5a or NTE5b master socket and provides two outlets on the faceplate, one is an RJ11 socket (wired “straight through”, unfiltered) for the connection of ADSL modems, the other is a BT 431A socket which is filtered for the connection of telephony equipment.

A 3-way IDC connector on the rear also provides a filtered output to any extension sockets (new 6 way are also available).

This unit is ideal if you have one computer within reasonable distance of the master socket, if all the other sockets are for telephony use you don’t need microfilters at each outlet.

DO NOT PUT ADDITIONAL FILTERS ON EXTENSIONS

* Tested by BT to SIN issue 2.2

* Compatible with caller display (doesn’t strip out the caller ID information)

* CE marked – BS EN55022

* Moulded from VO rated material colour matched to BT 1P white

* Dimensions (HxWxD): 68x84x30mm (excluding protruding connector plug)

Note: The NTE5 master socket is the type that when the lower half is un-plugged, it isolates the BT network side from the subscriber.

Any ADSL modems connected to the filtered output, either via the socket on the front or connected into hardwired extension sockets wired from the rear, will not function from these filtered outputs.

Some faceplates are branded BT, some are plain – all are made in the same factory

Does not include NTE5a socket pictured

More Broadband Products

Leave a Reply

Your email address will not be published. Required fields are marked *